HHUHU hydrogen machine
​FAQs

The patented PEM MEA proton exchange technology is currently recognized as the most pure hydrogen production technology in the industry.

The patented PEM MEA proton exchange technology is currently recognized as the most pure hydrogen production technology in the industry.

1. Commercially available hydrogen generators are usually relatively large in appearance

2. Some brands also use catalysts to produce hydrogen

3. The design of my machine is more humanized

4. Our machine has higher performance, such as lower power consumption and higher hydrogen production

1. The purity of hydrogen is better than 99.9995%: the product verification report of the Atmospheric Research Office of National Central University

2. Hydrogen flow rate: verification report of the Industrial Technology Research Institute of the Ministry of Economic Affairs

3. Product Design: New Patent Certificate of the Republic of China (Model No. M495363)

4. Electrical safety regulations: in line with EU CE electrical safety regulations

5. Output gas test report of the second-generation hydrogen generator: 99.999% pure hydrogen

Hydrogen is an environmentally friendly energy in the past, and hydrogen machines are products derived from environmentally friendly energy technologies

1. According to the product design, the water quality requirements for using pure (clean) water are recommended to be ≦1 μS/cm.

2. It is recommended to use in Hong Kong: Watsons distilled water.

Use 1000 hours machine filter replacement light will be on to remind you to replace the filter

1. No need, because it uses pure water without minerals and other impurities

2. If the device has not been turned on for more than 7 days (it is not recommended to leave it for a long time without turning it on, it is better to run it for at least 4-6 hours a week), it is recommended to replace it with new pure water.

When the new machine is used for the first time, please plug in the power first, and then add pure (clean) water, which can detect the addition status.

1. Automatically detect whether the air and water pipelines in the machine are normal.

2. Let the core be electrified to activate the core to make the PEM core performance normal.

1. Check whether there is too much water in the water tank. Too much water will cause some water to leak from the oxygen outlet. Drain the excess water, and then observe whether there is still water leakage

2. Whether there is a dumping machine, dumping will cause the water in the pipeline to concentrate at the hydrogen outlet, which will cause the machine to spray some water and let the machine run for 5 minutes to let the dumped water drain out to return to normal

Use a general water cup, put the breathing nasal tube into the water within 2 minutes to observe whether hydrogen gas is produced.

According to the product design 180W, the power consumption is 0.18 degrees per day for one hour of use

Short-term and deliberately increasing the number of plugging and unplugging will definitely cause damage to the product and the normal state of use.

1. The first generation HHUHU hydrogen generator has been on the market for about 7 years.

2. The overall research and development time is more than 8 years.